HIGH PRESSURE VALVES

LOW PRESSURE VALVE SERIES >
The Valv-Trol Low Pressure Valves have a more economical design for directional control of low pressure systems up to 500 psi.

CONTROLS >
The Valv-Trol Molding Press Controls (MPC) and Hydraulic System Controls (HSC) allow for intelligent operation of valves and other components to automate molding presses and hydraulic systems.

OPTIONS, MODIFICATIONS,
and CUSTOM DESIGNS >
Valv-Trol welcomes requests for modifications to our standard valves so you are furnished exactly what you require for your application. We offer a wide variety of options to meet your needs for higher pressures, special fluids, flanged ports, special body or trim materials, quicker shifting, etc. Many of these options have become so common for us in recent years that they are now considered "standard” options. Please call us with your most difficult system requirements, so we can recommend the best valve to meet all of your price, performance, and availability needs.

HIGH PRESSURE VALVE SERIES

The Valv-Trol High Pressure Balanced Valves offer the smoothest operation in applications up to 3,500 psi requiring the dependable control of liquids. Many of these valves are available in optional pressure ranges of 10,000 psi and above. Other designs are available up to 30,000 psi.

Two-Pressure
Valve Assembly

PSI: 3,500 up to 6,000
Sizes: 3/4"— 4"
Application:This specialty valve combination is made up of a 3-way, check and high pressure inlet valve. Several versions are available for operating single acting cylinders or presses.

For additional information,
See Valv-Trol Product Bulletin
A-1

Balanced 3-Way/2 Position Valves

PSI: 3,500 up to 10,000
Sizes: 3/4"— 4"
Application: Typically used for shut-off service or pump unloading on water or oil hydraulic systems.

For additional information,
See Valv-Trol Product Bulletin
A-3

3–Way Diverter and Selector Valve

PSI: 150 to 10,000
Sizes: 1/2"— 4"
Application: Shifting between two different pressures, two different fluids, or two different temperature liquids.

For additional information,
See Valv-Trol Product Bulletin
A-4

Balanced 2-Way/2-Position Valves

PSI: Up to 3,500
Sizes: 3/4"— 3"
Application: Typically used for hydraulic systems that use either raw water or 95/5.

For additional information,
See Valv-Trol Product Bulletin
A-5

Angle Check Valve

PSI: 3,500 up to 30,000
Sizes: 3/4"— 4"
Application: Spring loaded piston-style makes this a dependable performer in raw water or water-based fluids, as well as oils and other liquids.

For additional information,
See Valv-Trol Product Bulletin
A-6

Sequence or High Pressure
Inlet Valve

PSI: 3,500 up to 10,000
Sizes: 3/4"— 4"
Application: Typically used for shut-off service or pump unloading on water or oil hydraulic systems.

For additional information,
See Valv-Trol Product Bulletin
A-7

Balanced 2-Way/3- Position Valve For Throttling Service

PSI: 3,500 up to 10,000
Sizes: 3/4"— 4"
Application: Typically used to actuate a single acting cylinder or hydraulic press. Also used for diversion or selector service.

For additional information,
See Valv-Trol Product Bulletin
A-8

Low Flow 2-Way
and 3-Way Valves

PSI: 3,500 up to 30,000
Sizes: 1/2"— 3/4"
Application: Typically used on hydraulically powered auxiliary equipment where only low flows are required and fully balanced designs are not required.

For additional information,
See Valv-Trol Product Bulletin
A-14

Balanced 2-Way Valve Normally Open
or Normally Closed

PSI: 3,500 up to 10,000
Sizes: 3/4"— 4"
Application: Typically used for shut-off service or pump unloading on water or oil hydraulic systems.

For additional information,
See Valv-Trol Product Bulletin
A-29 for Normally Open
See Valv-Trol Product Bulletin
or A-30 Normally Closed

Pressure Reducing
(Regulating) Valves

PSI: 4,000 or 5,000
(500–4,500 adjustable range)
Sizes: 3/4"—1"
Application: Typically used to reduce downstream water or oil pressure. It is often used to control the tonnage on a cylinder or hydraulic press.

For additional information,
See Valv-Trol Product Bulletin
A-31

Pilot-Operated
Check Valves

PSI: Up to 150 up to 8,000
Sizes: 2"—8"
Application: Often used as shut-off valves for "gas over liquid" type accumulators. Also used as large capacity prefill or dump valves for large presses.

For additional information,
See Valv-Trol Product Bulletin
A-32

Back Pressure
Relief Valves

PSI: 300 to 25,000
Sizes: 1/2"—2"
Application: Sometimes called a back pressure regulator or bypass valve. It is used to regulate the discharge pressure of a positive displacement pump.

For additional information,
See Valv-Trol Product Bulletin
A-33